0
Skip to Content
Rigging & Heavy Lifting Equipment Supplier
ABOUT
PRODUCTS
Lifting Slings
Wire Rope
Rigging Hardware
Rope & Rope Inspection
Cranes
Winches
Hoists
Wire Rope Fittings
Spreader Beams
Chain
Crane Blocks & Sheaves
Load Measurement
Parking Garage/Hand Rail Installs
SERVICES
PARTNERS
CAREERS
CONTACT
LOCATIONS
1-800-40-SLING
Rigging & Heavy Lifting Equipment Supplier
ABOUT
PRODUCTS
Lifting Slings
Wire Rope
Rigging Hardware
Rope & Rope Inspection
Cranes
Winches
Hoists
Wire Rope Fittings
Spreader Beams
Chain
Crane Blocks & Sheaves
Load Measurement
Parking Garage/Hand Rail Installs
SERVICES
PARTNERS
CAREERS
CONTACT
LOCATIONS
1-800-40-SLING
ABOUT
Folder: PRODUCTS
Back
Lifting Slings
Wire Rope
Rigging Hardware
Rope & Rope Inspection
Cranes
Winches
Hoists
Wire Rope Fittings
Spreader Beams
Chain
Crane Blocks & Sheaves
Load Measurement
Parking Garage/Hand Rail Installs
SERVICES
PARTNERS
CAREERS
CONTACT
LOCATIONS
1-800-40-SLING
Crane Blocks & Sheaves G-403 Crosby® jaw end swivel
G-403 Crosby jaw end swivel Image 1 of
G-403 Crosby jaw end swivel
G-403 Crosby jaw end swivel

G-403 Crosby® jaw end swivel

$0.00

Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Meets other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.

Meet the performance requirements of Federal Specification RR-C-271G, Type VII, Class 3, except for those provisions required of the contractor.

  • Positioning device, not intended to rotate under load.

  • Hot-dip galvanized.

  • Quenched and tempered.

Quantity:
Add To Cart

Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Meets other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.

Meet the performance requirements of Federal Specification RR-C-271G, Type VII, Class 3, except for those provisions required of the contractor.

  • Positioning device, not intended to rotate under load.

  • Hot-dip galvanized.

  • Quenched and tempered.

Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Meets other critical performance requirements, including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.

Meet the performance requirements of Federal Specification RR-C-271G, Type VII, Class 3, except for those provisions required of the contractor.

  • Positioning device, not intended to rotate under load.

  • Hot-dip galvanized.

  • Quenched and tempered.

  • Product sheet

  • Contact your local rigging shop. You can also fill out our contact form to get your order directed to the right branch. Walk-in’s welcome Monday to Friday.

crosby rigging
 

American Rigging | Cal Swage | Cableco | Carpenter Rigging | Cable Cisco |
Carpenter Group Hayward Cable Moore | Consolidated Rigging

© 2025 - The Carpenter Group® | Privacy Policy | Warnings/Prop 65