0
Skip to Content
Rigging & Heavy Lifting Equipment Supplier
ABOUT
PRODUCTS
Lifting Slings
Wire Rope
Rigging Hardware
Rope & Rope Inspection
Cranes
Winches
Hoists
Wire Rope Fittings
Spreader Beams
Chain
Crane Blocks & Sheaves
Load Measurement
Parking Garage/Hand Rail Installs
SERVICES
PARTNERS
CAREERS
CONTACT
LOCATIONS
1-800-40-SLING
Rigging & Heavy Lifting Equipment Supplier
ABOUT
PRODUCTS
Lifting Slings
Wire Rope
Rigging Hardware
Rope & Rope Inspection
Cranes
Winches
Hoists
Wire Rope Fittings
Spreader Beams
Chain
Crane Blocks & Sheaves
Load Measurement
Parking Garage/Hand Rail Installs
SERVICES
PARTNERS
CAREERS
CONTACT
LOCATIONS
1-800-40-SLING
ABOUT
Folder: PRODUCTS
Back
Lifting Slings
Wire Rope
Rigging Hardware
Rope & Rope Inspection
Cranes
Winches
Hoists
Wire Rope Fittings
Spreader Beams
Chain
Crane Blocks & Sheaves
Load Measurement
Parking Garage/Hand Rail Installs
SERVICES
PARTNERS
CAREERS
CONTACT
LOCATIONS
1-800-40-SLING
Rigging Hardware G-209A Crosby® screw pin anchor shackle alloy
G-209A Crosby® screw pin anchor shackle alloy Image 1 of
G-209A Crosby® screw pin anchor shackle alloy
G-209A Crosby® screw pin anchor shackle alloy

G-209A Crosby® screw pin anchor shackle alloy

$0.00

Meets performance requirements of Grade 8 shackles.

Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.

G-209A Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade B, Class 2, except for those provisions required of the contractor.

  • Forged alloy steel, Quenched & Tempered, with alloy pins.

  • Working Load Limit permanently shown on every shackle.

  • Hot-dip galvanized.

Add To Cart

Meets performance requirements of Grade 8 shackles.

Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.

G-209A Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade B, Class 2, except for those provisions required of the contractor.

  • Forged alloy steel, Quenched & Tempered, with alloy pins.

  • Working Load Limit permanently shown on every shackle.

  • Hot-dip galvanized.

Meets performance requirements of Grade 8 shackles.

Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.

G-209A Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271G, Type IVA, Grade B, Class 2, except for those provisions required of the contractor.

  • Forged alloy steel, Quenched & Tempered, with alloy pins.

  • Working Load Limit permanently shown on every shackle.

  • Hot-dip galvanized.

  • G-209A product sheet

  • Shackle identification

    General information

    Screw pin shackle basics

  • Contact your local rigging shop. You can also fill out our contact form to get your order directed to the right branch. Walk-in’s welcome Monday to Friday.

crosby rigging
 

American Rigging | Cal Swage | Cableco | Carpenter Rigging | Cable Cisco |
Carpenter Group Hayward Cable Moore | Consolidated Rigging

© 2025 - The Carpenter Group® | Privacy Policy | Warnings/Prop 65